• 690V 1000V Variable Speed Drive For Motor Speed Adjusting With Low Harmonic
690V 1000V Variable Speed Drive For Motor Speed Adjusting With Low Harmonic

690V 1000V Variable Speed Drive For Motor Speed Adjusting With Low Harmonic

Product Details:

Place of Origin: China
Brand Name: ZK
Certification: CE IEC
Model Number: SD3000-T6

Payment & Shipping Terms:

Minimum Order Quantity: 1pcs
Price: 20000usd to 100000usd
Packaging Details: wooden carton
Delivery Time: 20 days
Payment Terms: T/T
Supply Ability: 10pcs/year
Get Best Price Contact Now

Detail Information

Voltage: 690V 1000V 3300V Name: Variable Speed Drive For Motor
Application: Permanent Magnet Synchronous Motor And AC Asynchronous Motor Certification: CE IEC
Output Volage: 3 Electric Level With Low Harmonic Frequency Resolution: Digital Setting: 0.01Hz Analog Setting: Maximum×0.025%
High Light:

690V Variable Speed Drive For Motor

,

Low Harmonic Variable Speed Drive For Motor

,

1000V VFD Motor Speed Control

Product Description

690V 1000V 3300V middle voltage frequency inverter, variable speed drive for motor speed adjusting


This medium voltage 3 level VFD are widely used in which the fields of electric power, iron and steel, petroleum, mining, chemical, cement, automobiles, and utilities.

It has several advantages as following:

Three-level drive technology, lower output harmonics, waveform closer to sine wave, lower motor heating, longer motor workinglife

High performance for driving permanent magnet synchronous motor and AC asynchronous motor

Compatible with 6 pulse, 12 pulse, 18 pulse, 24 pulse, multiple voltage input modes, allowing grid voltage range from 85% to 115%

V/f control and high-performance vector control can be provided to achieve two-quadrant and four-quadrant operation, saving energy and reducing consumption;

The larger starting torque to easy move the load, soft start and soft stop to eliminate the mechanical and electrical impact, to extend the service life of the equipment; 150% starting torque is available when 1Hz reaching.

With CAN, Rs485 and other communication interfaces, it can realize communication with the host computer, realize the centralized control operation of multiple devices, and transfer the operation data to the ground dispatching room for remote supervision.

Multi-channel digital, analog I/O interface

Compatible with European control mode; capable of master-slave control of multi-machine dragging device

Power balance during runing (no need to install encoder) and synchronous speed driving

It has perfect protection functions such as overcurrent, overload, short circuit, phase loss, leakage lockout, overvoltage, undervoltage, overheating and other protection functions.

Technical specification

Items Specification

Control

mode

Control mode V/F control Sensorless Vector control 1 Sensorless Vector control 2 Close loop vector control
Starting torque 1Hz 150% 0.5Hz 150% 0.25Hz 150% 180% under 0Hz
Speed adjust range ** 1:50 1:200 1:500
speed stabilizing
precision
±0.1% ±0.3% ±0.05% ±0.02%
Torque precision NO NO Yes Yes
Motor type General induction motor,permanent magnet synchronous motor (PMSM)


Function

design

Output volage 3 electric level with low harmonic
Highest frequency General vector control :400Hz V/f control:4000Hz
frequency resolution Digital setting: 0.01Hz analog setting: maximum×0.025%
carrier frequency 0.5K~16KHz, the carrier frequency can be adjust by temperature automatically
Frequency reference setting method Digital of Control panel, analog AI1, AI2, potentionmeter of control panel, UP/DN control, communication, PLC pulse frequency
Accel./decel. characteristic Linear curve and S curve accel. /decel. mode, range of time: 0.0 to 65000S.
V/F curve 3 mode: linear, multiple points, N Power
V/F separation 2 times separation: totally separation, half separation
DC braking DC braking frequency: 0.0 to 300Hz, DC braking current: 0.0% to 100%
Braking unit Built in braking unit up to 15kw, optional is 18.5kw to 75kw, external built in for above 93kw.
Jog function Job frequency range: 0.0 to 50.0Hz, the accel. and decel. time of Jog
Configuration PID Easy to perform pressure, flow, temperature close loop control
PLC multiple speed To achieve 16 segment speed running through built in PLC or terminal control
Common Dc bus * Multiple inverters use one DC bus for energy balance.
Auto voltage regulation (AVR) Enable to keep output voltage constant when grid fluctuation
Over load tolerance capability G type model: 150% rated current for 60s, 180% rated current for 2s,
P type Model: 120% rated current for 60s, 150% rated current for 3s.
stall control when over current, over voltage Carry out limiting automation for running current, voltage to prevent over current, over voltage frequently
Fast current limit function minimize the IGBT module broken to protect the inverter, maximum reduce the over current fault.
Torque limit and torque control "Excavator" characteristics , torque limit automatically during motor running. Torque control is available in close loop vector control mode.

 

Items Specification
features friendly interface Display Hello when power on.
Multiple function key MK.F button It can set for Forward Jog, reverse Jog, forward/reverse switch
Timing control function A total running time and total running time calculating
Motor over heat protection Accepting motor temperature sensor signal input via AI1 terminals.
Command source Control panel, control terminals, series communication, switch freely.
Frequency source Digital setting, analog current/voltage, pulse setting, serial communication, main and auxiliary combination.
Protection function Short circuit detect after power on, input/output phase missing, over voltage, over current, under voltage, over heat, over load protection.
Environment Application site Indoor, free of exposure to sunlight, no dusty, no corrosive, no inflammable gas, no oil and water vapor, and water dipping
Altitude Lower 1000m
environment temperature -10℃~+40℃, power derated for 40~50℃, rated current derated 1% for 1℃increasing.
Humidity Less than 95%, no water condense.
Storage -40~+70℃

 

 

Products Feature:

1 . Substantial reduction of harmonic current on power source side

SD3200 suppresses the harmonics by using a multi-pulse diode rectification system (12 to 60 pulses),thereby substantially reducing the generation of harmonics in comparison with previous models. The harmonic generation level stipulated in IEEE 519 (1992) is satisfied. This inverter is ideal for power sources.

 

 

2 . Total inverter effi ciency as high as approximate 97%

a). Because an output transformer is unnecessary, inherent losses are eliminated.

b). Multi-level PWM control minimizes switching loss.

c). Because the harmonic current on the power source side is reduced, the primary winding of the input transformer

has a reduced harmonic losses

 

3 . Source power factor as high as 95% or more

a). Due to full-wave rectifi cation with multi-phase diodes,operation is allowed with the source power factor (power factor on power source side) set at a high level.

b). A phase advancing capacitor and a DC reactor for improving the source power factor are unnecessary.

c). A smaller power capacity suffices for inverter operation.

4. High-reliability

a) . Higher equipment reliability is achieved by reducing the number of inverter cells by using a single-phase,3-level inverter, etc..

b). Stable operation is maintained despite load fluctuations, by the simple sensor-less vector control function.

c). The control device has a 32-bit MPU for quick response and high-accuracy.
5. Vector control

Vector control with a speed sensor is available (as an option) for equipment having high speed and torque accuracy requirements. (option)

6. Easy maintenance

a). The inverter is air-cooled, requiring no cooling water.

b). Start/stop operation, parameter setting, fault display and data monitoring are performed on the touch panel with simple loader functions.

c). Simple, built-in auto-tuning functions facilitate testing and adjustment.

d). Fault diagnoses are easily performed.

e). A dry-type input transformer is adopted.

 

Model list

SD3000-37G-T11-ASDA

SD3000 stand for products name

37G stand for rated of power, 37kw

T11 stand for input voltage range, T6: 3PH, 660VAC input, T11: 3PH, 1140VAC, T33: 3PH 3300VAC

ASDA stand for function description,

 

SD3000 series 1140V VFD model list
Series Model list Rated Power Input current Output current Input reactor DC Reactor Output Reactor
1 SD3000-37G-T11-ASDA 37 20 23   7.3mh/ 25A 1mh/25A
2 SD3000-45G-T11-ASDA 45 26 28   5.6mh/ 32A 0.8mh/28A
3 SD3000-55G-T11-ASDA 55 34 36   4.2mh/ 42A 0.62mh/36A
4 SD3000-75G-T11-ASDA 55 47 50   3mh/ 58A 0.45mh/50A
5 SD3000-90G-T11-ASDA 90 56 60   2.6mh/ 69A 0.38mh/60A
6 SD3000-110G-T11-ASDA 110 68 73   2.2mh/ 85A 0.3mh/73A
7 SD3000-132G-T11-ASDA 132 82 85   1.78mh/100A 0.26mh/85A
8 SD3000-160G-T11-ASDA 160 98 104   1.5mh/ 120A 0.22mh/104A
9 SD3000-200G-T11-ASDA 200 122 128   1.2mh/ 150A 170mh/128A
10 SD3000-250G-T11-ASDA 250 150 160   0.97mh/ 185A 140mh/160A
11 SD3000-315G-T11-ASDA 315 185 195   0.79mh/ 230A 115mh/195A
12 SD3000-400G-T11-ASDA 400 235 250   0.62mh/ 285A 90mh/250A
13 SD3000-500G-T11-ASDA 500 300 310   0.5mh/ 370A 72mh/310A
14 SD3000-560G-T11-ASDA 560 355 350 0.22mh/ 355A   64mh/350A
15 SD3000-630G-T11-ASDA 630 380 395 0.19mh/ 380A   57mh/395A
16 SD3000-710G-T11-ASDA 710 430 450 0.17mh/ 430A   50mh/450A
17 SD3000-800G-T11-ASDA 800 480 500 0.15mh/ 480A   45mh/500A
18 SD3000-1000G-T11-ASDA 1000 600 520 0.12mh/ 600A   36mh/620A
               
SD3000 series 3300V VFD model list
Series Model list Rated Power Input current Output current Input reactor Output Reactor  
1 SD3000-800G-T33-ASDA 800 166 173 1.2mH/170A 0.6h/180A  
2 SD3000-1000G-T33-ASDA 1000 208 216 1mH/210A 0.48h/220A  
3 SD3000-1250G-T33-ASDA 1250 259 270 0.8mH/260A 0.39h/270A  
4 SD3000-1500G-T33-ASDA 1500 311 324 0.67mH/320A 0.32h/320A  
5 SD3000-2000G-T33-ASDA 2000 415 433 0.5mH/420A 0.24h/420A  
6 SD3000-3000G-T33-ASDA 3000 623 649 0.34mH/630A 0.16h/630A  
SD3000 series 6600V VFD model list
Series Model list Rated Power Input current Output current Input reactor Output Reactor  
1 SD3000-1000G-T66-ASDA 1000 91 95 4mH/100A 2mH/100A  
2 SD3000-1500G-T66-ASDA 1500 114 119 3.3mH/120A 1.6mH/120A  
3 SD3000-2000G-T66-ASDA 2000 143 149 2.7mH/150A 1.3mH/150A  
4 SD3000-2500G-T66-ASDA 2500 171 178 2.2mH/180A 1mH/180A  
5 SD3000-3000G-T66-ASDA 3000 228 238 1.7mH/240A 0.8mH/240A  
6 SD3000-5000G-T66-ASDA 5000 342 357 1.1mH/360A 0.6mH/360A  

 


 

Want to Know more details about this product
I am interested in 690V 1000V Variable Speed Drive For Motor Speed Adjusting With Low Harmonic could you send me more details such as type, size, quantity, material, etc.
Thanks!
Waiting for your reply.